Top Mounted Level Switch


Model Name/Number SF/TLI/409
Process Connection 3/4" / 1" Flanged (ANSI 150#) or BSP Screwed
Brand Sunflow
Type Mechanical
Material SS316/SS 304 PP/ MS
Centre Distance Up to 1400 mm
Display Type Analog
Operating Pressure 10 Kg/cm (Metallice) / 2 Kg/cm (at amb temp) (PVDF / PP MOC)
Operating Temperature 200 DegreeC (Metallic)/100 DegreeC (PVDF)/70 DegreeC(PP)
Glass Material Borosilicate
Gasket PTFE
Color Blue Or Siemens Grey
End Fitting Flange /screw
Surface treatment Galvanized Steel
Surface Finish Vip Blue Powder Coated

Model No. SF/TLI/409 MAKE SUNFLOW

Construction & Operation Level Gauge is fitted between two end blocks through gland packings. The gauge is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge. Guards are provided in the form of tie-rods / c-channels around the gauge to protect it from accidental blows. End blocks have built-in isolating valve, drain valve&vent plug.

Features

  • 360 Degree visibility with tie-rod guards. Glass removal / replacement possible w/o dismantling of gauge. Offset isolating valves permit cleaning of glass gauge w/o removal.

Special Features (Optional)

Illuminator Illuminates poorly lit areas for proper visual indication.
Frost Free Prevents frost formation on outer surface of gauge glass for clear visual reading in case of liquids at low temperature.
Jacketing For heating / cooling of process liquid to prevent its solidification.
Glass Protectors To provide additional protection and personnel safety.
Auto Ball check Built into end block for preventing liquid loss, during glass breakage.

Standard Specifications

C/C Distance Up to 1400 mm in single glass tube
Gauge HW Borosilicate Glass 12,16 ,19/ 25mm OD (25mm for Viscous Liquids)
End Block MOC CS / SS 304 / SS 316 / PP / PVDF
End Block Type W/o Valve / Offset NV with or W/o Auto Ball Check
Guards CS/ SS 304 / FRP C-Channels or Tie-Rods
Gland MOC CI / SS 316 / PP with PVDF insert
Packing PTFE, VITON, SILICON
Process conn. 3/4" / 1" Flanged (ANSI 150#) or BSP Screwed
Vent / Drain Plug / Ball valve
Calibrated Scale milky white acrylic Polycarbonate (LC=2mm) / SS(LC=10mm) Large CCD's thru' Coupler
Visibility CC Dist - 150mm
Maximum Temp. 200 DegreeC (Metallic)/100 DegreeC (PVDF)/70 DegreeC(PP)
Test Pressure 10 Kg/cm (Metallice) / 2 Kg/cm (at amb temp) (PVDF / PP MOC)

Featured Products

Site Designed & Maintained by PEXATEK