L Shape Pitot Tube

SUNFLOW Make manufacturing of Pitot Tubes of all types for measuring Air/Gas or LIQUID Velocities in Ducts & Pipe Lines. Pitot Tubes are manufactured as perps/ Standards or as per given design or drawing having length and material of construction. Four different models are available to suit to customers specific application.

L,S-Shaped: Generally L-Shape, Concentric tube type Pitot tube with curved joint and ellipsoidal nose are used for clear Air / Gas & is most widely used pitot tube. Calibrated pitot tubes with coefficient: Pitot tubes can be supplied with coefficient calibration reports from Indian institute of technology, Powai at extra cost.

Standard length pitot tubes: Generally standard length pitot tubes are available ex-stock with or without calibration reports & can be immediate.

Standard

• MOC-304 S.S.
• Pipe -O.D. 3/8", I.D. 1/4"
• Pressure Connections 1/4" BSP (Female) or as required
• Process connection nil
• Another required length, M.O.C., O.D. & I.D. Pipe, pressure connections can be provided

Optional

• Engraved insertion depth marking
• Nozzel or other process connection adaptors
• Isolating valves Connecting Hose or Tubing
• D.P. Indicating Instrument
• Any other size, material of construction or tube as per your given drawing can be made & supplied.

S Shape Pitot Tube

Recommended specifically for flow / velocity measurement of dirty, particulate laden air or gas streams. Typical in environmental testing, large I.D. (1/4" or more) tubing resists chocking under harsh, sooty conditions. Again tube can be cleaned easily by passing air or water through it. Total & static pressure tubes are precisely aligned & arc welded together at every six inch, for maximum accuracy, strength and durability. 1/4" BSP (F) connections easily adapt to any type of pipe or tubing. Permanent engraved insertion depth graduation (optional) facilitates accurate positioning.

Features

• Long lasting S.S. construction
• 1/4" BSP (F) pressure connections,
• Permanently welded • Rated for upto 815°C (1500°F) Temp.

Straight Type Pitot tube.

Straight , Concentric tube type Pitot tube with straight pipe , ellipsoidal nose are used for water application Calibrated pitot tubes with co-efficient: Pitot tubes can be supplied with co-efficient calibration reports from Indian institute of technology, Powai at extra cost. Standard length pitot tubes: Generally standard length pitot tubes are available ex-stock with or without calibration reports & can be immediately.

Standard

• MOC-304 S.S.
• Pipe -O.D. as per range
• Pressure Connections 1/4" BSP (Female)
• Process connection as per Pipe Dia
• Other required length, M.O.C., O.D. & I.D. Pipe, pressure connections can be provided.

Pitot Tube Manometer

In industry where in, the velocities being measured are often those flowing in ducts and tubing where measurements by an anemometer would be difficult to obtain. In these kinds of measurements, the most practical instrument to use is the Sunflow pitot tube. The pitot tube can be inserted through a small hole in the duct with the pitot connected to a Sunflow U-tube water gauge or Sunflow Inclined tube manometer or Sunflow digital manometer or differential pressure gauge for determining the velocity inside the ducted wind tunnel. One use of this technique is to determine the amount of cooling that is being delivered to a room. The fluid flow rate in a duct can then be estimated from: