Sunflow Technologies

Tubular Level Indicator

Model Name/Number	SF/TLI/409
Process Connection	3/4" / 1" Flanged (ANSI 150#) or BSP Screwed
Brand	Sunflow
Type	Mechanical
Material	SS316/SS 304 PP/ MS
Centre Distance	Up to 1400 mm
Display Type	Analog
Operating Pressure	10 Kg/cm (Metallice) / 2 Kg/cm (at amb temp) (PVDF / PP MOC)
Operating Temperature	200 DegreeC (Metallic)/100 DegreeC (PVDF)/70 DegreeC(PP)
Glass Material	Borosilicate
Gasket	PTFE
Color	Blue Or Siemens Grey
End Fitting	Flange /screw
Surface treatment	Galvanized Steel
Surface Finish	Vip Blue Powder Coated

Model No. SF/TLI/409 MAKE SUNFLOW

Construction & Operation Level Gauge is fitted between two end blocks through gland packings. The gauge is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge. Guards are provided in the form of tie-rods / c-channels around the gauge to protect it from accidental blows. End blocks have built-in isolating valve, drain valve&vent plug.

Features

360 Degree visibility with tie-rod guards. Glass removal / replacement possible w/o dismantling of gauge. Offset isolating valves permit cleaning of glass gauge w/o removal.

Special Features (Optional)

Illuminator		Illuminates poorly lit areas for proper visual indication.
Frost Free		Prevents frost formation on outer surface of gauge glass for clear visual reading in case of liquids at low temperature.
Jacketing		For heating / cooling of process liquid to prevent its solidification.
Glass Protectors		To provide additional protection and personnel safety.
Auto Ball check		Built into end block for preventing liquid loss, during glass breakage.

Standard Specifications

C/C Distance		Up to 1400 mm in single glass tube
Gauge		HW Borosilicate Glass 12,16 ,19/ 25mm OD (25mm for Viscous Liquids)
End Block MOC		CS / SS 304 / SS 316 / PP / PVDF
End Block Type		W/o Valve / Offset NV with or W/o Auto Ball Check
Guards		CS/ SS 304 / FRP C-Channels or Tie-Rods
Gland MOC		CI / SS 316 / PP with PVDF insert
Packing		PTFE, VITON, SILICON
Process conn.		3/4" / 1" Flanged (ANSI 150#) or BSP Screwed
Vent / Drain		Plug / Ball valve
Calibrated Scale		milky white acrylic Polycarbonate (LC=2mm) / SS(LC=10mm) Large CCD's thru' Coupler
Visibility		CC Dist - 150mm
Maximum Temp.		200 DegreeC (Metallic)/100 DegreeC (PVDF)/70 DegreeC(PP)
Test Pressure		10 Kg/cm (Metallice) / 2 Kg/cm (at amb temp) (PVDF / PP MOC)